ROCK 5 ITX Setup Guide

Turn your ROCK 5 ITX into a WiFi Router, Secure VPN, or both with SPR. This guide will show you how.

Install a Docker Host System

SPR can run on any host which supports Docker, however, it is best tested with Ubuntu.

Grab the Ubuntu Server image for your board and install it. See the Ubuntu Rockchip page for help.

The username and password should be ubuntu/ubuntu

SPR can run as a VPN server only. See the full VPN Setup Guide.

When running in Virtual SPR mode it uses a virtual network, so the host system's firewall and network configuration is unaffected.

sudo bash -c "$(curl -fsSL https://raw.github.com/spr-networks/super/master/virtual_install.sh)"

If there is a firewall port 51280/udp needs to be open for incoming traffic, and port forwarded to the device

When setting up SPR as a router it will configure the host device's network.

SPR is distributed as source and as prebuilt docker images. You can get them started

Follow the full setup guide

git clone https://github.com/spr-networks/super
cd super
sudo ./base/scripts/setup.sh
reboot
cd ~/super/
docker compose up -d